25 replies to this topic

[Ashley]

Unfortunately Spencer, I don't have the luxury of being able to tweak the SNR via my router as I don't have a router supported by the godly DMT tool.

As i've said, if I start having issues that i'll get O2 to simply stick it back up (which they have said they would do no problem).

I'm just happy i've got my faster speeds again, like I say, I could have swore I had a lower than 6db SNR on my line before BT started to dick about with cables.

[Ashley]

Bah, knew it wouldn't last...

--- System Information ---
Vendor: Linksys
ModelName: WAG160N
Firmware Version: A1.00.15 , 2009-05-31T16:58:02
GUI Version: A1.00.15_007
Boot Version: 1.0.37-5.4
Hardware Version: 0.01

--- DSL Information ---
DSL Driver Version:  AnnexA version - A2pB022g.d20e
DSL VPI/VCI:         0/101
DSL Status:          ShowtimeRetrain Reason:	8000
DSL Mode:            ADSL2+
DSL Channel:         FAST
DSL Upstream Rate:   1196 Kbps
DSL Downstream Rate: 3418 Kbps

                      Down         up    
DSL Noise Margin:     8.4 dB       3.4 dB
DSL Attenuation:     56.5 dB      31.4 dB
DSL Transmit Power:  18.3 dBm     12.4 dBm

--- Wireless Information ---
Wireless Driver Version: 6.1.1.111
Wireless Tools Version: 28
Wireless Status: Enabled
Wireless Wide Channel: 11
Wireless Standard Channel: 9- 2.452GHZ
Wireless SSID: O2wireless998144

Ahhh well, at least its still faster than the 2.8mb I was getting!

[SpencerUk]

Ashley, on 18 August 2010 - 16:20, said:

Bah, knew it wouldn't last...

--- System Information ---
Vendor: Linksys
ModelName: WAG160N
Firmware Version: A1.00.15 , 2009-05-31T16:58:02
GUI Version: A1.00.15_007
Boot Version: 1.0.37-5.4
Hardware Version: 0.01

--- DSL Information ---
DSL Driver Version:  AnnexA version - A2pB022g.d20e
DSL VPI/VCI:         0/101
DSL Status:          ShowtimeRetrain Reason:	8000
DSL Mode:            ADSL2+
DSL Channel:         FAST
DSL Upstream Rate:   1196 Kbps
DSL Downstream Rate: 3418 Kbps

                      Down         up    
DSL Noise Margin:     8.4 dB       3.4 dB
DSL Attenuation:     56.5 dB      31.4 dB
DSL Transmit Power:  18.3 dBm     12.4 dBm

--- Wireless Information ---
Wireless Driver Version: 6.1.1.111
Wireless Tools Version: 28
Wireless Status: Enabled
Wireless Wide Channel: 11
Wireless Standard Channel: 9- 2.452GHZ
Wireless SSID: O2wireless998144

Ahhh well, at least its still faster than the 2.8mb I was getting!

Really sorry I missed this,

Call O2 up and ask them to transfer you back onto standard ADSL as it ADSL 2 will do jack on your loop loss anyway....If its anything like what happened with mine, your attenuation will drop a little too

[Ashley]

But the maximum I got with normal ADSL was 2mbps, it's why I was so glad to go onto ADSL2, because it effectively doubled me speed

[SpencerUk]

By going back to G.DMT you may actually see a better sync rate...ADSL 2 isn't really good for longer lines...pushes attenuation up which screws everything up.

Switch back onto G.DMT and make intermittent sync

[JackDinn]

Quote

make intermittent sync

Depends how "intermittent" intermittent is !